‘TermiPore5X5’ - The Latest Anti-Termite Reticulation Pipe - How is it different ? - What are its benefits & How to install it ?

TermiPore is not just a pipe but an entire anti-termite reticulation system. With its strong culture of Research and Development, TermiPore offers a very wide range of standard and customized options, along with all the necessary accessories, to suit your site and budget.

Termipore now introduces a new, premium “TermiPore 5 x 5”

 Suitable for sites, where high consistency of flow is required, and junction boxes need to be very few. Like all TermiPore products, this too is a highly reliable and long-lasting product, with stringent quality control protocols.

 

TermiPore 5X5 Reticulation Pipe is different from all other models.It is different in terms of its raw material, design as well as the process of production. It is a very smooth pipe made from a special polymer compound. The holes in this model are made during a secondary process. As a result, the holes are very precise and perfectly spaced andthe flow rate is very uniform.

There are 3 main benefits of using TermiPore 5 x 5:

1 - The smooth surface inside the pipe allows for much longer length installations, so a junction box is required at 50 mtr intervals rather than the 25 mtr interval in regular TermiPore

2 - The flow rate is much more uniform due to the secondary process of making holes

3 -Also, the material is such that the holes open-up more with increasing pressure from the pump so you can better control the flow rate of the termiticide.

Crucial technical information, product application and unique features of Termipore™ Reticulation pipe - TP5x51014 are listed below:

-Inside Diameter 10 mm Outside Diameter 14 mm Tolerance +/- 0.5 mm.

- Designed flow per mtr per hour of water or liquid of Sp. gravity 1.0 at pressure 0.25 Kg/ cm2: 10 to 15 ltr

-Highly precise holes made through a special secondary process to ensure high uniformity of flow rate.

- More than 500 holes, of about 0.5mm; per meter length of pipe

- Holes are all around the circumference, ensuring proper flow rate across the length of the pipe

- Holes open more and more as pressure increases in the system. As a result, the flow can beincreased or decreased by changing the input pressure

- Due to the very smooth surface of this pipe, the pressure loss along length of the pipe is very less and hence a junction box can be placed every 50 meters as compared to every 25 meters for other pipes. This is an ideal product where junction boxes need to be very few

-  All standard 12 mm fittings can be used with Termipore 5 x 5 www.termipore.com

- Raw material is made of blended compound of polymer and additives

- RoHS compliant material (RoHS Directive 2001/95/EC Amendment 2011/65/EU). Test Report available on request

-Time taken for natural degradation of the pipe (beyond use) after installation and not exposed to atmosphere 50 years

 

Usage instructions for better results:

· For best results, ensure all turns are made with a large turning radius. For sharp turns use elbow or other fittings. Ensure the pipe is not locked

· Install Termipore pipe at ground level or below flooring. Do not expose the pipe to open air or above the floor. Use PVC / PE pipe above the flooring, since the outlet pipes may become hard over a long period

· Do not pour cement directly over the pipe. Cover pipe with sand or paper if needed

· When using 0.5 HP pump – given an outlet / box every 50 meters or 150 feet. If you need to install it longer than this length, use higher capacity pump, or ensure that you pump in termiticide from both ends of the pipe.

 

For more details, visit www.termipore.com or

Contact us at: marketing@termipore.com +91-63592-92525/8401017087