Will the reticulation pipes get blocked in few years? - The most commonly asked question for Preventive Anti-termite Retic

When it comes to Anti-termite Reticulation - preventive anti-termite method; very often architects, end-users, and at times even pest control service providers ask:

Will the pipes block, bend, squeeze or erode in 3-4 years? Such a doubts lead to a perception that the system will not work in the long run and hence there is no point in installing this system.

This may have been the case in the initial years when the system was newly introduced in India, due to many reasons. Let us understand the major reasons why such myth got prevalent.

      (1)   INAPPROPRIATE MATERIAL & PIPE THICKNESS

Compared to the west, this system is relatively new to India. It was introduced in India about 20/22 years ago. Back then, the practice was to install any irrigation pipe or any plastic pipe for the purpose. All those materials were for use above ground. They did not have the weight bearing capacity, highly required in anti-termite reticulation pipes. Hence they would squeeze under pressure and the system would not give the desired results.

However, TermiPore, in use since almost 17 years; has conducted intensive research in this filed. TermiPore is made of specially developed elastomeric raw material compound. Their raw material is best suited for underground installation. It does not erode over time, or get squeezed under pressure. It is long lasting and has a life of 50 years or more. Furthermore, TermiPore is the only pipe that is lab-tested to corroborate these facts. 



Often, thin pipes with thin walls are installed. This too is not suitable for underground installation. Such  pipes get squeezed under weight or at corners during installation. TermiPore offers pipes in various sizes with high wall thickness. TermiPore Anti-termite Reticulation Pipes do not bend or squeeze with weight or at corners. 



 
           

(1)                                 PIPE DESIGN    

Back then, the pipe design was not that efficient. There were holes on one side of the pipe, mostly at a distance of 1 feet. So even if one hole got blocked, the medicine would not reach an area of 2 feet!! That can be quite a disastrous.

Based on research and development, TermiPore has specially developed a honeycomb design, with pressure operated holes all along the length and all along the circumference of the pipe. There are about a 100 microholes in one feet. So even if some holes do get block, it will not affect the performance, as there are far too many pressure operated micro holes in all directions, throughout the pipe. Thus, along with durability, TermiPore also offers a consistent flow rate, in comparison to other pipes 



(a)    (a)  The pipes should not be in direct touch with wet cement. Install it in sand and cover it with sand

(b)   

(b) Do not bend it at sharp point. Install it with a slight curve or use jointers and ties.


(c)  Install junction boxes at required intervals

       (d)  View installation videos on our website, social media handles or 

              YouTube channel

             https://www.youtube.com/watch?v=iakUX_rRfp4&t=1s

      (e) You can also contact us. TermiPore offers technical guidance and training for installation of TermiPore Reticulation Pipes. TermiPore also offers technical support in terms of installation layout. Not just that, TermiPore also provides all the necessary accessories for installation.


Thus TermiPore is a Comprehensive Reticulation System, Not Just Pipes!

(4)  QUALITY

This is a one-time installation only and quality is of utmost importance. TermiPore is manufactured by a company that is more than 50 years old and it has ISO 9001: 2015 Certification. Brand TermiPore, in use since more than 15 years, assures best quality, consistently. We have a stringent quality control system in place. Every roll of TermiPore is checked for 9 quality parameters and the flow rate is mentioned on each roll. 

Protect your precious property and expensive interiors from termites, Contact us at:

+91 6359292525 / 8401017087 or mail us at: marketing@termipore.com

www.buy.termipore.com / www.termipore.com

             

Comments

Post a Comment

Popular posts from this blog

Termipore Installation: Is it Better at Plinth Level or After PCC?

Image
  When it comes to termite protection, proper installation timing is crucial for long-lasting results. One of the common questions that we are often asked is: When to install Termipore; at Plinth Level or after Plain Cement Concrete (PCC) has been laid? Read on for a quick overview. Each stage in the construction process offers benefits for termite treatment, and understanding those benefits will give an insight into when to schedule TermiPore installation, so as to achieve maximum effectiveness. Understanding the Key Stages in Construction Before diving into the specifics of Termipore installation, it is important to have a basic understanding of the key stages involved in the foundation of a building: 1. Plinth Level: This is the stage where the foundation is being prepared and the structure is ready to rise above ground. The plinth is the part of the building just above the ground level and typically marks the transition from underground construction to above-ground s...
Read more

Termipore Anti-Termite Reticulation System: A Revolution in Termite Control

Image
 Termites pose a serious threat to buildings and structures, causing extensive damage that can be both costly and time-consuming to repair. Traditional methods of termite control often involve chemical barriers or baiting systems, which have many limitations & problems. However, Termipore Anti-Termite Reticulation System has emerged as an innovative and effective solution to protect structures from termite infestations. In this blog, we will explore the features, benefits, and installation process of Termipore – a comprehensive system, that addresses the problem of termite infestation in a simple, effective, and affordable manner.   Features of the Termipore Anti-Termite Reticulation System: 1. Unique Reticulation Design:   Termipore system features a unique reticulation design that allows for precise and uniform distribution of the termiticide throughout the soil, creating a continuous barrier against termites. TermiPore is available in 3 standard sizes and i...
Read more

What are the Extra Precautions After Installing TermiPore Reticulation System on PCC?

Image
  As you are aware, TermiPore Reticulation system is versatile and can be installed at various stages of construction: Before, During & After. For details on this, visit www.termipore.com We also recommend that it is used along with Soil Treatment at foundation level, to enable repeat treatment every few years, after construction. Visit www.termiore.com , for to know more. Brand TermiPore is a comprehensive Reticulation System, that offers not just Pipes, but all the needed accessories along with sound technical support. Recently we had hosted a live session on How To Install TermiPore Above PCC , the recording is available at our YouTube handle:   https://youtu.be/MmySc_cwAbA Furthermore, along with showing how to install TermiPore over PCC, we also demonstrated the extra precautions to be taken before leaving the site after installation over PCC. This video is also available at : https://youtube.com/shor...
Read more